Design Concept Series: DLP Modeling Sand, SprintRay Printers Compatible
SORRY, OUT of STOCK, team is on it...
Please check back at a later stage.
Or find the SUBSTITUTE as described below.
Price:
$75.00
Product Description
Sorry, this item has been discontinued.
It is replaced by BioModeling Sand
DLP Modeling Sand is 5~10% shorter print time than DLP Modeling Tan and Gray via “Study Model White 2” profile. Muted color and surface, easy to decerning fine details, less straining on the eyes.
Product features (Not endorsed by SprintRay)
- Design and calibrated on SprintRay Pro95 & Pro95s
- Great for study model and thermoform
- Tensile strength (58~65Mpa) / Elongation (3-4%)
- VOC Free
- SKU: DMD-R001SD
- For detailed print instructions, please refer to Printing Tips
- Note: For other open source DLP printers, please refer to Calibration Tutorial
- Download Multi-Printer Exposure Settings
Product Details
| Color: | Sand |
|---|---|
| Size: | 1 KG |
| Material: | Acrylate-based Polymer for 3D Printing |
| Tensile(MPa): | 58 - 65 |
| Elongation(%): | 3 - 4 |
| Impact(J/m): | 20 - 24 |
| Hardness(Shore): | 90 - 93D |
| Flexural Strength(MPa): | 95 - 115 |
| Flexure Modulus (MPa): | 1800 - 2200 |
| HDT(°F/°C): | 153°F/67°C |
| Tear Strength(kN/m): | - |
| Compression(%): | - |
| Viscosity at 77°F/25°C: | 380 - 430 |
| Recommend post cure condition: | ProCure 30°C, 30min. or ProCure2: Key guide |
