Design Concept Series: DLP Modeling Tan V3, SprintRay Printers Compatible
SORRY, OUT of STOCK, team is on it...
Please check back at a later stage.
Or find the SUBSTITUTE as described below.
Price:
$70.00
Product Description
Sorry, this item has been discontinued.
It is replaced by DLP Modeling Sand or BioModeling Sand
DLP Modeling Tan V3 is reformulated to Pro95’s new print profile (Die and Model 2 Tan). The material is designed to make accurate dental models for all applications with great dimensional stability. The new V3 is also capable of printing 170 micron layer thickness and easy to remove.
Product Features (Not endorsed by SprintRay)
- Calibrated on Pro95 print profile: Die and Model 2 Tan
- Specifically formulated to print on SprintRay Pro, also prints well on MoonRay D and S
- Tensile strength (52~59Mpa) / Elongation (1-2%)
- VOC Free
- SKU: DMD-R003TN
- For detailed print instructions, please refer to Printing Tips
- Note: For other open source DLP printers, please refer to Calibration Tutorial
Product Details
| Color: | Tan |
|---|---|
| Size: | 1 KG |
| Material: | Acrylate-based Polymer for 3D Printing |
| Tensile(MPa): | 52 - 59 |
| Elongation(%): | 1 - 2 |
| Impact(J/m): | 23 - 28 |
| Hardness(Shore): | 88 - 90 |
| Flexural Strength(MPa): | 105 - 118 |
| Flexure Modulus (MPa): | 1950 - 2100 |
| HDT(°F/°C): | - |
| Tear Strength(kN/m): | - |
| Compression(%): | - |
| Viscosity at 77°F/25°C: | 380 - 410 |
