Design Concept Series: Modeling 200 Gray, Formlabs Printers Compatible
SORRY, OUT of STOCK, team is on it...
Please check back at a later stage.
Or find the SUBSTITUTE as described below.
Price:
$80.00
Product Description
Sorry, but this item has been discontinued.
Please choose another color in this resin category.
Laser Modeling 200 is our fastest and most efficient resin. It is suitable for applications where scale and efficiency are required. It also exhibits high accuracy and smooth surface, great for many dental applications. Modeling 200 is similar to Draft resin and can print up to 4 times faster than our Modeling resins. It supports both 200 and 100 micron print resolutions and prints with Draft V2 profile.
Product Features
- Calibrated on Formlabs’ Form2 and Form3
- Preform Material Selection: Draft V2 With Any FL Cartridge
- Print Layer Thickness: 200, 100 microns
- Tensile Strength (57-59 MPa) / Elongation (3-7%)
- Minimum Odor
- SKU: M200-R001GY
- For detailed print instructions, please refer to Printing Tips
Product Details
| Color: | Gray |
|---|---|
| Size: | 1 KG |
| Material: | Acrylate-based Polymer for 3D Printing |
| Tensile(MPa): | 57 - 59 |
| Elongation(%): | 3 - 7 |
| Impact(J/m): | 43 - 44 |
| Hardness(Shore): | 86 - 88D |
| Flexural Strength(MPa): | 92 - 104 |
| Flexure Modulus (MPa): | 1700 - 2000 |
| HDT(°F/°C): | 138.02/58.9 |
| Tear Strength(kN/m): | - |
| Compression(%): | - |
| Viscosity at 77°F/25°C: | 675 - 825 |
| Layer thickness(um): | 200 |
| PostCure:: | FormCure 60°C, 5min |
